800W High power Jail Cellular Jammer Model:CPJ6022
Cellphone Detector

Cell Phone Listening Device Detector Cell Phone Detector RF Signal Detection Device Wireless/Wired Camera

Item No.: VS-GV
Cell Phone Listening Device Detector RF Signal Detection Device Wireless/Wired Camera 2G Cell Phone Pocket
Request Quote
Vodasafe VS-GV Pocket-Sized RF Detector Wired Hidden Camera Bug Detector with LED
Description
Mini-Pocket RF Signal Detector Superior Sensitivity With Digital Select Switch Pocket RF Signal Detector VS-066GV 

SZ Vodasafe VS-GV Pocket RF Signal Detector
Description:
The SZ Vodasafe VS-GV is a premium pocket-sized RF signal detector designed to safeguard your privacy by detecting peeping cameras, bugs, cellular phones, and other radio frequency devices. Equipped with advanced fuzzy scanning technology and a new digital amplifier, this device ensures precise detection of both analog and digital signals, including Bluetooth, WLAN, Wi-Fi, cellular phones, and Digital Spread Spectrum wireless products. Its compact design and multiple functional modes make it an essential tool for protecting privacy in various environments, from offices to private rooms.
Mini-Pocket RF Signal Detector with Superior Sensitivity Features with Detecting Frequencies of 50 MHz-6.0 GHz
Features:

Low Battery Warning
A red LED with a battery icon at the bottom illuminates when batteries are depleted, prompting immediate replacement to ensure uninterrupted operation.
Silent Detection Modes
Silent Mode (VS-GV): Reduces embarrassment by disabling audible alarms, relying solely on 3 LED indicators to signal detected signals.
Vibration Mode (Optional Variant): Provides tactile feedback through vibration, ideal for discreet scanning without attracting attention.
Earphone Hearing Mode: Enables private detection via earphones, allowing you to monitor signals without others' awareness.
Wired Camera Detection
Activate the ultra-bright LED via the red wire detection switch to scan for hidden wired cameras.
Identify camera lenses by observing stable reflections that do not shift when the detector light is moved, distinguishing them from other reflective surfaces.
Note: Ultra-bright LED should not be used continuously; switch off after 3 minutes to prevent overheating.
Analog/Digital Select Switch
Position A (Analog): Optimized for detecting wireless cameras, hidden microphones, and two-way radios, with steady LED illumination and continuous buzzer sound.
Position D (Digital): Enhances detection of Bluetooth, WLAN, Wi-Fi, cellular phones, and digital spread spectrum products, featuring blinking LEDs and intermittent buzzer alerts.
Sensitivity Adjustment
Fine-tune detection range via the sensitivity tuner:
Turn to "+" to increase sensitivity (extend detection distance).
Turn to "-" to decrease sensitivity (shorten detection distance and eliminate background noise).
Interference (Background Noise) Elimination
Adjust sensitivity to filter out ambient RF noise, ensuring accurate detection in noisy environments. Only the power LED (green) should be on in normal operation.
Signal Discrimination
Wireless Camera/Hidden Microphone: Continuous wave signals trigger steady LED illumination and continuous buzzer sound.
Cellular Phone: Pulse wave signals cause blinking LEDs and intermittent, low-pitched buzzer sound.
Mini-Pocket RF Signal Detector with Superior Sensitivity Features with Detecting Frequencies of 50 MHz-6.0 GHz
Technical Specifications
Power Source 2 x AAA/UM-4 batteries (3V DC)
Detecting Frequencies 50 MHz - 6.0 GHz
Dimensions L 87 mm x W 55 mm x H 24 mm
Weight 105 g
Warning Modes - Audible alarm with 3 LEDs
- Silent mode (LEDs only)
- Vibration with 3 LEDs
- Silent mode with LEDs and earphone
Detection Distances - 5.8 GHz Wireless camera: ~8 feet (10mW regular camera)
- 2.4 GHz Wireless camera: ~20 feet (10mW regular camera)
- 2G Cellular phone (Analog): ~40 feet
- 2G Cellular phone (Digital): ~50 feet
- Wired camera: ~15 feet
Operation Guide
Step 1: Battery Installation
Slide off the battery lid, insert two AAA batteries following the "+" and "-" polarity marks, then replace the lid.
Step 2: Power On and Initial Check
Extend the antenna and slide the power switch to the upper position.
Verify the power LED turns green to confirm proper operation.
Step 3: Sensitivity Calibration
Turn the sensitivity tuner to "+" until the Level 1 LED turns yellow.
Gradually turn the tuner to "-" until the Level 1 LED is slightly yellow, setting the baseline sensitivity.
Step 4: Signal Detection
Scan the environment slowly. As signal strength increases, LEDs will light up sequentially (Level 1 Yellow → Level 2 Yellow → Level 3 Red), and the buzzer will speed up.
Adjust the A-D switch based on the signal type (Analog for continuous waves, Digital for pulsed waves).
Wired Camera Detection Procedure
1.Press the red wire detection switch to activate the ultra-bright LED.
2.Scan suspected areas for reflective surfaces (metal or glossy objects may reflect light).
3.Slightly move the detector left and right:
If the reflection shifts, it is not a camera lens.
If the reflection remains stable, it may be a hidden camera lens.
4.Turn off the LED after 3 minutes of continuous use.
Notice of Use
Remove batteries if the device will not be used for an extended period to prevent damage from leakage.
Unauthorized repair or disassembly voids all warranties.
Keep the device away from water and moisture.
Avoid storing in extremely hot environments.
Prevent knocks or drops that may damage internal components.
Do not use the antenna to touch metal surfaces or signal emission sources.
Warranty does not cover damage from static electricity or feedback.
Warning
The VS-GV serves as an auxiliary tool and does not replace comprehensive supervision.
RF detection performance may vary based on environmental factors.
SZ Vodasafe disclaims liability for any loss or damage due to malfunction or misuse.
Copyright
© 2025 SZ Vodasafe. All rights reserved. No part of this manual may be reproduced or transmitted without written permission. Specifications and design are subject to change without prior notice. "VS-GV" and "SZ Vodasafe" are trademarks of the manufacturer.

 
Mini-Pocket RF Signal Detector with Superior Sensitivity Features with Detecting Frequencies of 50 MHz-6.0 GHz
 
Review


ver_code
1/3
X